Home > Error Code > Canon Mp500 Error Code 6a00

Canon Mp500 Error Code 6a00

Contents

I shut off the printer and moved the printer cartridge assembly, which moved freely. Canon service said to either take to service center or have a refurbished unit sent. Open the machine and remove the ink cartridges then look inside with a flash light and make sure nothing is in the path of the carriage. It worked! Check This Out

By the way this was my first error on this printer after having it for almost 4 yrs. I would also suggest that you use a syringe or an eye dropper and put several drops of Windex(or water) on each pad and let it soak down through the Purge Right where the paper was. There is no service center near where I live, so I am really out of luck.

Canon Mp830 Error Code 6a00 Alarm

All the gray sponges seem to be in place, but it (MP800) wont feed paper from the top tray. Add to Want to watch this again later? So the wiper could not seat all of the way.

Happy Christmas to you! I was going crazy not finding out the error when I found your tutorial. Sorry for the delay, it took me some time to find a suitable tool and a good light. Canon Mp530 Check Printer 6a00 by unknown on Dec 15, 2007 at 9:45am Add comment Please sign in to comment 0 Model MP830I was getting Error 6A00 and it turned out to be that the black

A Pixma MP830 would still be under Canon warranty, get it into a shop and save yourself the hassel. Canon Printer Error 6a00 Mp610 It physically wont move. If so, see if you can get it unstuck. It is such a waste to throw away a good machine that I paid good money for.Shaun - Anonymous Please explain in more detail what and where the purge unit is.

Whatever has jammed the purge unit into the the carriage asm can't be fixed without taking the printer apart. Canon A6000 When I turn it on it makes a whirring noise, but there is no movement. We are grateful and appreciative that you posted. by flemingo on Aug 14, 2007 at 3:11am Add comment Please sign in to comment 0 The guy on 3/9/07 had it right, there is a rectangular foam piece under the

Canon Printer Error 6a00 Mp610

The Solution Canon Pixma IP4300 Error 6A00, this reset tips is from someone (nick the use who posted in the forum is someone) in printer forum but the tutorial in picture.  I'm so excited I fixed my first printer!!!!!! - Anonymous mp600 it worked by moving the plastic assy forword and back thanks alot - Anonymous These directions were great and worked Canon Mp830 Error Code 6a00 Alarm Hope this help by Anonymous on Mar 9, 2007 at 11:32pm Add comment Please sign in to comment This did the trick. Canon Mp600 Error Code 6a00 Pushed carriage to far left (should slide easily)4.

Printed three pieces of paper and now I have an error code. http://winnport.com/error-code/canon-mp500-error-code-6500.html I have looked everywhere for a paper jam and can't find one. and now my printer is printer again although got some inks on my fingers which is better than going to a service center!Thanks so much for sharing! NOTE - Wear a rubber glove or something before attemping or else you'll have a couple fingers full of ink that doesnt come off very easily :P ... Error Code 6a00 Canon Pixma Ip6600d

There is sometimes a small sponge like pad that can pop up and cause it to get stuck if that popped up you will need to push it back down. When I turn the printer on it makes noise, but the print head does not move at all on its own. I've been a loyal HP user and decided to change brands and purchased the mp970. this contact form Clean the pads, the while nylon arm, and the soft wiper as good as you can.

Recently have been printing 4x6 color photos, probably around 60-70 the past couple of months, using the cassette. Sony A600 Turn off power and then back on again. I haven't been able to find any paper jams or foreign objects and the print head seems to move freely when I manually move it.

DiKu4CIAOde 34,535 views 2:20 Canon Pixma Mp830 Review Full - Duration: 13:46.

Here's what I did:1) Turn off Printer2) Open the printer3) Move the ink to the left4) Look in the space to the right where the cartridges usually stay and there is You can manually slide the entire ink holder mechanism to the far left. I read all of the write-ins but to no avail. Canon Printers Used diluted napisan (oxygen-based cleaning agent in the ratio of 1:3 with powder:water) and soaked paper towel6.

Now, the ink holder mechanism is completely stuck to the far right and I can't move it manually. by unknown on Mar 12, 2007 at 12:29am Add comment Please sign in to comment Your A600 is a paper path error, usually related to the purge unit. Use an eye dropper and put some windex on each pad. navigate here Thanks.

Kristijan Gulas says: May 29, 2011 at 4:37 pm your advice helped me. Simply slide the cartridges to the left and push the sponges down. Working... Any thoughts?thanks,vince by Anonymous on Jul 9, 2007 at 3:15am Add comment Please sign in to comment Have you got anywhere.

Problem solved! - Anonymous 0 I have a Canon PIXMA ip5200 that was less than 6 months old and used very little. Ask IT Technicians for Answers ASAP Not a Printers Question? Please click the Accept as Solution button so that others may find the answer as well. There seems to be another similar part still in place.

Please try again later. Turn the power off (unplug it)and open up the unit to expose the printer ink cartridge holders. With the printhead stuck, I can't get to the purge unit? - unknown Your explanation of where the purge unit resided on the 830 did the trick for me. Sowrav D.

After 8 mos at first they sent me 2 different printheads. Freddy M. They are not in sight but are homed in at the far right. Report Inappropriate Content Message 2 of 2 (14,917 Views) Reply 0 Kudos « Message Listing « Previous Topic Next Topic » © Canon U.S.A., Inc. | Terms of Use |

Thank you! by Anonymous on Dec 17, 2007 at 9:12pm Add comment Please sign in to comment 0 Thanks to all in this group for some very useful pointers. I wiggled the little rectangular sponge (it's not soft like a sponge, but looks like one) around a little bit with a pen and got it back sitting flat in it's Many, many thanks.

I've had two canons but never again. It sounded like it was printing, then fininshed, but nothing came out.